Geberit type 380 float valve | Ref: 281.002.00.1 | For Delta 12 concealed cistern

This is the latest generation of theGeberit type 380 float valvewith brass tip, reference281.002.00.1,specially designed for the Delta UP100 built-in cistern.

I'm not going to beat around the bush: this is the best!

• Robust against limestone/rainwater
• Silent
• Easy to repair

Please note, there are several versions of this float valve:

Geberit type 380 float valve for UP320 and UP300 concealed cistern
Geberit type 380 float valve for Delta concealed cistern
(you are already on the product page)
Geberit type 380 float valve with flexible hose for Twinline concealed cistern
Geberit float valve type 380 for porcelain cistern and plastic cistern
Geberit float valve type 333 for certain Geberit plastic cisterns
Geberit type 360 ​​float valve for bottom feeds

If you want to be sure of compatibility, find the reference inside your Geberit cistern and enter it in my search bar.Identify your Geberit cistern.

By purchasing from my store, you reward my advice and content,
thank you🫶

Summary:

1. Evolution
2. Functionality
3. Malfunction
4. Successful Geberit maintenance


1. Evolution

The resistance:
This Geberit float valve is resistant to rainwater and limescale.

Water level adjustment:
Your Geberit float valve should already be installed in your water-filled tank.
Using the white rod extending from the float valve, you can adjust the water level in the tank. At the top of this rod, you have a dial:

• If you turn it clockwise, you raise the water level.
• If you turn it counterclockwise, you lower the water level.
• Pulls mini-flush toilets to refresh the water level.
  
  Identify your Geberit cisternand receive the water level adjustment linked to your tank.

2. Features

Facility :
The brass end of the float valve is ready to connect to your hose. It's plug and play. Next, install the end onto the white clamp on the support block.

Silent :
Its design makes it one of the quietest on the market.

Repairability:
This float valve has been cleverly designed to allow easy access to the membrane. In addition, Geberit spare parts are available for 50 years.


3. Malfunctions

The tank fills very slowly:
If your tank takes a long time to fill, you need to replace the float valve diaphragm. It's probably torn. If your float valve is in poor condition, such as encrusted with limescale, you may want to consider replacing it entirely.

The filling does not stop:
The problem probably comes from the Geberit membrane.

Limestone:
When the float valve is too encrusted with limescale, it can become jammed and no longer perform the up-and-down movements of the float correctly. I advise you to clean it thoroughly or replace it if it is in really bad condition.

4. Successful Geberit maintenance

Successful repair
Successfully maintaining your Geberit wall-hung toilet is super simple. You need the right disassembly/reassembly guide and the corresponding spare parts. Lindsay and I managed to do just that by combining the two. To do this, simply identify your cistern by noting the reference number inside, then enter it into my Geberit search bar.

We'll keep in touch ;)
Stan