Regiplast / Oli float valve | Ref: 740002 | For built-in tanks

Here is thefloat valve 740002 Regiplast / OLI

By purchasing from my store, you reward my advice and content,
thank you🫶

Water level adjustment:
Your QFX Allia float valve should already be installed in your water-filled tank. You can adjust the tank's water level using the yellow rod extending from the float valve. At the top of this rod, you'll find a dial:

• If you turn it clockwise, you raise the water level.
• If you turn it counterclockwise, you lower the water level.
• Pulls mini-flush toilets to refresh the water level.
  
  The tank fills very slowly:
  If your tank takes a long time to fill, you need to replace the float valve diaphragm. It's probably torn. If your float valve is in poor condition, such as encrusted with limescale, you may want to consider replacing it entirely.
  

The filling does not stop:
The problem is probably with the membrane.

Limestone:
When the float valve is too encrusted with limescale, it can become jammed and no longer perform the up-and-down movements of the float correctly. I advise you to clean it thoroughly or replace it if it is in really bad condition.

We'll keep in touch ;)
Stan