Geberit 2-piece connecting pipe set | Ref: 152.404.46.2 | With gaskets, 2 clamping nuts, 2 centering devices, 2 washers and 2 nut covers | Length 18.5cm

Hello, it's Stan!
The Geberit connecting sleeves with frame-side drain seal, reference: 152.404.46.2 , connect the support frame to the toilet bowl. They will need to be cut to the correct length.

The bowl-side gaskets are supplied, as well as the drain gasket on the support frame side. I advise you to also take the injection gasket on the support frame side . By replacing this other gasket, you are sure to guarantee the watertightness of the connecting pipes when reinstalling the bowl.

These cuffs come with plastic nut/centering device and nut covers.

What you can also use is Geberit lubricant to apply to the inside of the joints on the frame-support side. This prevents the toilet from being pushed violently against the wall during installation.

Oh yes, you will also need a 19mm open-end wrench to loosen and tighten the bowl nuts ;)

By purchasing from my store, you are rewarding my experience and video content. Thank you 🫶

Do you have any doubts about compatibility?
Identify your Geberit tank , you will only find the parts specific to your tank.
It takes 2 minutes.