Kit of 2 Siamp connecting pipes | Ref: 34 1171 67 | With their seals, 2 clamping nuts and 2 nut covers

Hello, it's Stan!
These Siamp connecting sleeves, reference: 34117167 , connect the support frame to the bowl. They will need to be cut to the correct length.

The bowl side seals are provided and I advise you to also take the other 2 seals on the support frame side, the injection seal , the evacuation pipe seal and without forgetting its clamping ring (To clamp the seal on the pipe). By replacing these 2 other seals you are sure to guarantee the sealing of the connecting pipes when reinstalling the bowl.

These cuffs come with a plastic nut/centering and nut cover.

What you can also use is Geberit lubricant to apply to the inside of the seal on the frame-support side. This prevents the toilet from being pushed violently against the wall during installation.

Oh yes, you will also need a 19mm open-end wrench to loosen and tighten the bowl nuts ;)

By purchasing from my store, you are rewarding my experience and video content. Thank you 🫶

Are you looking for the right part?
Identify your Siamp tank , you will find only the parts specific to your tank, including the seals.
It takes 2 minutes.